BLM E-Turn 52 Electric CNC Tube Bender

Equipped with additional 2000Kg booster for variable radius bending. Programmable by the operator X-axis speed: 1000 mm/sec
ACCET101 – Power-Up Option – Increased bending torque
Siemens Simotion CNC with 19″ touch panel and digital drives
Multi-Stack tooling capability with 3 right and 3 left for bending die height of 60mm. Total stack height per side 7.08” with rigid mount bend die tool post
Programmable right and left electric pressure die assist
RVET6060 – Variable radius tool holder set – 60 mm tall tools – 60 mm dia. tool post
ETRV6060 – Accessories for the fast change of H=60 variable radius tools, for pin diam.60
ET6060 – Tool Mounting Plates – quick change clamp and pressure die mounting plates for 3 stack, 60 mm tall standard tool sets
Servo electric mandrel retraction, includes 3 mandrel rods with diameters (10-16-24) mm
GEL-A20 – Mandrel lubrication system for dispensing paste or gel type lubricant
WELDET – Weld Seam Detection uses grey scale differentiation to provide weld seam orientation
MC1052 – Hole Detection senses non-through holes and slots to provide orientation. Requires WELDET option
VGP3D – Virtual Graphics Programming software provides part, tool and bend sequence simulation to prove feasibility, provide clearance checks and program optimization
B-TOOLS – Spring back compensation software- manually measured and inputted
B-IMPORT – Import 3D IGES or STEP files directly into VGP3D
VGP3D/PC – Offline VGP3D single seat license to be used on the customers PC for BLM bender programming, feasibility analysis and program optimization
PC/ETURNRL- Post processor for ETURN52 and VGP3D/PC
B-IMPORT/PC – Import 3D STEP or IGES files into VGP3D/PC
Full perimeter safety fence with protection system
COMFORT1 – Foot Switch for collet actuation
COMFORT2 – Programmable laser scanner to establish safety zone