New Arrival

  • 0 out of 5

    2D Laser System: HK | 2012 | FL 3015 | 5000 Watts, 5′ x 10″

    SKU: 16763

    Siemens 840D CNC Controls, PRC 5000 Watt Co2 Resonator, 5′ x 10′ Dual Pallet Shuttle Tables, Chiller Unit, Dust Collector.

    NOTE: Laser Automated Load/Unload seen in photos is sold separately.

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    2D Laser System: Mitsubishi | 2006 | LVP-3015 | 4000 Watts, 5′ x 10′

    SKU: 16736

    Mitsubishi PC Based CNC Controls, Mitsubishi 40CFX 4000 Watt Laser, Non Contact Cutting Head, Precision Rack and Pinion Drives, Chiller Unit, Dust Collector.

    Machine has 25,500 Discharge Hours

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    2D Laser System: Trumpf | 2004 | L3050 | 5000 Watts, 5′ x 10′

    SKU: 16777

    Siemens CNC Controls, Trumpf 5000 Watt Resonator, 5′ x 10′ Dual Pallet Shuttle Tables, Trumpf LiftMaster, High Speed Linear Drives, Chiller Unit, Dust Collector, Enclosed Cutting, Safety Light Curtains.- 4 cutting heads

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    2D Laser System: Trumpf | 2006 | L3040 | 4000 Watts, 5′ x 10′

    SKU: 16780

    Siemens CNC Controls, Trumpf 4000 Watt Resonator, 5′ x 10′ Dual Pallet Shuttle Tables, X2 Sprint Axis, 5″ and 7.5″ Cutting Heads Chiller Unit, Dust Collector, Enclosed Cutting, Chip Conveyor, Safety Light Curtains.

    NEW RESONATOR IN 2017 – Machine has 8,500 Power On Hours & 2,500 Beam On Hours Since New Resonator Exchange!!

    Robovent Hood Not Included !!!

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    2D Laser System: Trumpf | 2011 | Trulaser 2030 | 3200 Watts, 5′ x 10′

    SKU: 16776

    Siemens CNC Controls, Trumpf Tru-Coax 3200 Watt Laser, 5′ x 10′ Table, Integrated Automatic Load/Unload System, Non-Contact Cutting Heads, Chiller Unit, Dust Collector, Safety Light Curtains.

    8,900 hours.

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    Plate Rolls: Faccin | 2012 | HAV 3145 | 3 Roll Variable Axis, NA

    SKU: 16787

    Electronic Controls
    Electronic Balacing (.008″ accuracy on parallelism)
    Rolling Only 1.772″, 89″ ID (YP of 36,000 psi)
    With Pre-Bending 0.984″, 89″ ID (YP of 36,000 psi)
    Rolling Only 1.524″, 89″ ID (YP of 52,000 psi)
    With Pre-Bending 0.846″, 89″ ID (YP of 52,000 psi)
    Rolling Only 1.083″, 31″ ID (YP of 52,000 psi)
    With Pre-Bending 0.677″, 31″ ID (YP of 52,000 psi)
    Rolling Only 2.215″, 89″ ID (YP of 36,000 psi)
    With Pre-Bending 1/230″, 89″ ID (YP of 36,000 psi)

    Variable Geometry (top roll moves vertically and lower rolls move horizontally)
    allowing maximum flexibility in rolling sizes and thicknesses.
    Hydraulic Adjustment of all rolls inside LINEAR SLIDE SYSTEM
    Top Roll driven by HYDRAULIC MOTOR AND GEARBOX
    Normalized, Hardened (52-56 RC) & STRESS RELIEVED Roll Forgings
    DIGITAL READOUTS assist in accurate repetition o rolling process
    HYDRAULIC DROP END for removal of finished ferrule
    HYDRAULIC PROTECTION against overloads
    PERMANENT LUBRICATION system for maximum reliability
    Safety Cable around machinery (with micro switch for immediate stop)
    Movable CENTRAL OPERATOR CONSOLE (on castors) with controls
    WARNING LIGHTS on console for low oil level and oil filter change
    Cone Bending Attachment
    HiTech Hydraulic Package
    Polished Rolls (for prefinished materials)
    One (1) Overhead Support and Two (2) Side Supports

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    Press Brake: Ermak | 2012 | Evo 10×110 | 10′, 121 Tons

    SKU: 16642

    Ermak ER90 CNC Controls, X & R 2 Axis Back Gauges, CNC Ram Control, CNC Bed Crowning, Complete Set of Quick Change Ram Tool Holders, Laser Light Guarding, 2 Sliding Front Supports, Electric Foot Switch.

    !!! From Honda Aircraft Model Shop !!!

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    Shearing Machine: Fischer | 1988 | DHS63000 | 10′, 1/4″

    SKU: 16778

    New PC Controls Programmable Back Gauge Control, Front Squaring Arm, Two Front Support Arms, Electric Foot Switch.

    0.00$
    Avaiability: In Stock
  • 0 out of 5

    Turret Punch Press: Murata | 2001 | Vectrum 3046 | 33 Ton, 4′ x 8′

    SKU: 16782

    Fanuc 16L CNC Controls, 54 Station Turret, 2 Auto Index Stations, High Speed Programmable Hydraulic Ram, Brush Tables, Large Assortment of Tooling.

    0.00$
    Avaiability: In Stock
Back to top
X